亚洲一区欧美在线,日韩欧美视频免费观看,色戒的三场床戏分别是在几段,欧美日韩国产在线人成

鑄態珠光體球墨鑄鐵組織形態與性能
作者:
作者單位:

作者簡介:

通訊作者:

中圖分類號:

基金項目:


Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 圖/表
  • |
  • 訪問統計
  • |
  • 參考文獻
  • |
  • 相似文獻
  • |
  • 引證文獻
  • |
  • 資源附件
  • |
  • 文章評論
    摘要:

    在普通球墨鑄鐵的基礎上,加入Cu、Sb合金元素,通過余溫正火工藝,獲得鑄態珠光體球墨鑄鐵。該鑄鐵的珠光體含量大于(等于)95%,滲碳體小于(等于)5%,抗拉強度可達700~850 Mpa,硬度為280~350 HB,延伸率為3%~5%。掃描電鏡及透射電鏡分析表明,當加入0.5% Cu、0.02%Sb時,合金主要由珠光體與球狀石墨組成,其中鑄態珠光體層片間距變小,石墨球細小而均勻, 鐵素體的形成受到抑制。

    Abstract:

    Based on common nodular cast iron, a pearlite nodular cast iron was obtained by normalizing and adding alloying elements of Cu, Sb. The content of pearlite in alloy exceeded 95% and the content of cementite was under 5%. The tensile strength of this cast iron was up to 700~850 Mpa, hardness was 280~350 HB and the specific elongation was 3%~5%. The morphology of pearlite in Cu, Sb pearlite nodular cast iron was studied by transmission electron microscope (TEM) and scanning electron microscope (SEM). The results indicated that the lamellar spacing in pearlite and the dimension of nodular were smaller, and the information of ferrite was impeded due to the addition of 0.5% Cu and 0.02%Sb.

    參考文獻
    相似文獻
    引證文獻
引用本文

朱先勇,劉耀輝,張英波,宋雨來.鑄態珠光體球墨鑄鐵組織形態與性能[J].農業機械學報,2007,38(2):179-182.[J]. Transactions of the Chinese Society for Agricultural Machinery,2007,38(2):179-182.

復制
分享
文章指標
  • 點擊次數:
  • 下載次數:
  • HTML閱讀次數:
  • 引用次數:
歷史
  • 收稿日期:
  • 最后修改日期:
  • 錄用日期:
  • 在線發布日期:
  • 出版日期: