亚洲一区欧美在线,日韩欧美视频免费观看,色戒的三场床戏分别是在几段,欧美日韩国产在线人成

加工中心冷卻系統故障模式危害性模糊評價分析
作者:
作者單位:

作者簡介:

通訊作者:

中圖分類號:

基金項目:


Author:
Affiliation:

Fund Project:

  • 摘要
    • |
  • 圖/表
    • |
  • 訪問統計
    • |
  • 參考文獻
    • |
  • 相似文獻
    • |
  • 引證文獻
    • |
  • 資源附件
    • |
  • 文章評論
    摘要:

    加工中心冷卻系統的故障信息常常具有很強的模糊性。常規故障模式影響與危害度分析方法由于僅考慮故障發生頻率和嚴重程度，當考慮故障檢測和維修難易程度時，難以給出有效而準確的分析結果。因此提出應用模糊綜合評判方法進行危害度分析。綜合考慮了故障發生概率、故障嚴重程度、測試性和維修性等因素，將定性問題進行定量分析，以某加工中心冷卻系統為例，計算出冷卻系統故障模式危害度，并以此作為判斷可靠性改進方向的依據。結果表明，液、氣、油堵塞故障模式的危害性最大,與實際相符。

    Abstract:

    The failure information of the cooling system of machining center is fuzzy frequently. The normal analysis method of failure mode critically only considers the failure probability and serious degree. When the testing and the maintainability of failure are considered, the failure mode criticality can not be accurately analyzed by FMECA. The fuzzy theory was proposed to analyze the failure mode criticality. It comprehensively included the failure probability, the failure serious degree, the testing and the maintainability of failure, which could carried out the qualitative question quantitatively. The failure mode criticality of cooling system of a machining center was calculated to determine the direction of improving reliability. The results showed that the criticality of jam stem was serious, which was consistent with the facts.

    參考文獻
    相似文獻
    引證文獻
引用本文

王桂萍,賈亞洲,申桂香,張日明.加工中心冷卻系統故障模式危害性模糊評價分析[J].農業機械學報,2008,39(3):171-174.[J]. Transactions of the Chinese Society for Agricultural Machinery,2008,39(3):171-174.

復制
分享
文章指標
  • 點擊次數:
  • 下載次數:
  • HTML閱讀次數:
  • 引用次數:
歷史
  • 收稿日期:
  • 最后修改日期:
  • 錄用日期:
  • 在線發布日期:
  • 出版日期: