亚洲一区欧美在线,日韩欧美视频免费观看,色戒的三场床戏分别是在几段,欧美日韩国产在线人成

最小量潤滑精密車削中切削液的滲透
作者:
作者單位:

作者簡介:

通訊作者:

中圖分類號:

基金項目:


of Cutting Fluid in Minimum Quantity Lubrication Precision Turning
Author:
Affiliation:

Fund Project:

  • 摘要
    • |
  • 圖/表
    • |
  • 訪問統計
    • |
  • 參考文獻
    • |
  • 相似文獻
    • |
  • 引證文獻
    • |
  • 資源附件
    • |
  • 文章評論
    摘要:

    分析了最小量潤滑（MQL）切削中供液方位、供液距離等因素對切削液滲透能力的影響。在SB-CNC超精密數控機床上進行了MQL車削45號鋼試驗，通過對切削力、表面粗糙度和切屑形態的研究表明：噴嘴位于主后刀面且距刀尖20mm處供應較大量的切削液能達到良好的切削效果。

    Abstract:

    The permeability of cutting fluids influences cutting effect directly. The main influential factors of cutting fluid penetration in minimum quantity lubrication (MQL) such as nozzle position, spray parameters were analyzed theoretically with spray and fluid mechanics. Based on turning 45 steel tests on CNC super precision machine tool, the cutting effect such as cutting force, surface roughness and chip shape were studied. Theory and tests results show that supplying more cutting fluids from main tool flank at proper position (20mm from cutting point) can get better cutting effect: low cutting force, low surface roughness and easy treated chip.

    參考文獻
    相似文獻
    引證文獻
引用本文

張春燕,王貴成,馬利杰,裴宏杰,吳永祥.最小量潤滑精密車削中切削液的滲透[J].農業機械學報,2009,40(5):194-198. of Cutting Fluid in Minimum Quantity Lubrication Precision Turning[J]. Transactions of the Chinese Society for Agricultural Machinery,2009,40(5):194-198.

復制
分享
文章指標
  • 點擊次數:
  • 下載次數:
  • HTML閱讀次數:
  • 引用次數:
歷史
  • 收稿日期:
  • 最后修改日期:
  • 錄用日期:
  • 在線發布日期:
  • 出版日期:
文章二維碼