亚洲一区欧美在线,日韩欧美视频免费观看,色戒的三场床戏分别是在几段,欧美日韩国产在线人成

偏心鏈輪傳動機構的運動學分析及參數優化
作者:
作者單位:

作者簡介:

通訊作者:

中圖分類號:

基金項目:


and Parameter Optimization of Eccentric Sprockets Transmission Mechanism
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 圖/表
  • |
  • 訪問統計
  • |
  • 參考文獻
  • |
  • 相似文獻
  • |
  • 引證文獻
  • |
  • 資源附件
  • |
  • 文章評論
    摘要:

    針對偏心鏈輪傳動機構工作過程中鏈條松緊變化大的問題設計了偏心張緊輪。通過優化張緊輪的轉動中心位置、偏心量和初始角位移,使鏈條在周期中始終處于張緊狀態。利用微分對該傳動機構進行了運動學分析,列出了主、從鏈輪角位移關系的求解方程,并以此為基礎,進行了傳動系統的運動學分析和張緊輪的輪心坐標、初始相位角和偏心量的優化計算,其目標是在周期中使鏈條松緊波動最小。列出了優化實例,在優化過程中考慮了鏈節長度的非連續性。

    Abstract:

    Aiming at the large fluctuation for chains length of two eccentric sprockets transmission mechanism at work, an eccentric tensional sprocket was set. The chains were always in tension through the optimized revolving center, eccentricity and initiatory phasic angle of the eccentric tensional sprocket. By kinematics analysis with differential equation, the relation equation of angle displacement between the main sprockets wheel and subordinate sprockets was obtained. Then, the optimization calculation for the position of rotary center, initiatory phasic angle and eccentricity of the tensional sprocket was accomplished, with a view of the minimal degree of tightness fluctuate of chain. An optimizing example was present. Furthermore, the consideration for the non-continuity of chain length was taken into in optimization. 

    參考文獻
    相似文獻
    引證文獻
引用本文

代麗,趙雄,趙勻.偏心鏈輪傳動機構的運動學分析及參數優化[J].農業機械學報,2009,40(12):233-236. and Parameter Optimization of Eccentric Sprockets Transmission Mechanism[J]. Transactions of the Chinese Society for Agricultural Machinery,2009,40(12):233-236.

復制
分享
文章指標
  • 點擊次數:
  • 下載次數:
  • HTML閱讀次數:
  • 引用次數:
歷史
  • 收稿日期:
  • 最后修改日期:
  • 錄用日期:
  • 在線發布日期:
  • 出版日期: