亚洲一区欧美在线,日韩欧美视频免费观看,色戒的三场床戏分别是在几段,欧美日韩国产在线人成

切削速度對Inconel 718加工表面完整性的影響
作者:
作者單位:

作者簡介:

通訊作者:

中圖分類號:

基金項目:

國家重點基礎研究發展計劃(973計劃)資助項目（2009CB724401）;國家自然科學基金資助項目（50828501）;國家科技重大專項（2009ZX04014-043）;“十一五”國家科技支撐計劃資助項目（2008BAF32B01）;山東省自然科學杰出青年基金資助項目（JQ200918）


Effects of Cutting Speed on Surface Integrity of Inconel 718
Author:
Affiliation:

Fund Project:

  • 摘要
    • |
  • 圖/表
    • |
  • 訪問統計
    • |
  • 參考文獻
    • |
  • 相似文獻
    • |
  • 引證文獻
    • |
  • 資源附件
    • |
  • 文章評論
    摘要:

    隨著機械加工對于更快的材料去除率和更好的表面完整性的需求，高速切削高強度鎳基高溫合金Inconel 718的應用是必然的發展趨勢。通過賽阿龍（Sialon）陶瓷刀具高速銑削Inconel 718試驗，研究切削速度對Inconel 718加工表面完整性的影響規律。結果表明，隨著切削速度的提高加工表面完整性越來越好，在試驗條件范圍內，當切削速度達到1400m/min時，獲得的表面完整性最好。

    Abstract:

    As one kind of high strength and thermal resistant nickel-based alloys, Inconel 718 has been used extensively in aerospace industries. To satisfy the instant requirements of higher material removal rate and good surface integrity from engineering practice, high speed machining of Inconel 718 is an inevitable trend. The influences of cutting speed on surface integrity were investigated through the experimental study with high-speed milling Inconel 718 using Sialon ceramic tool. The results showed that higher cutting speed could exploit to give excellent surface integrity. The best surface integrity was obtained in the investigation at the highest cutting speed of 1400m/min in the applied cutting speed range.

    參考文獻
    相似文獻
    引證文獻
引用本文

曹成銘,劉戰強,楊奇彪.切削速度對Inconel 718加工表面完整性的影響[J].農業機械學報,2011,42(1):223-227. Cao Chengming, Liu Zhanqiang, Yang Qibiao. Effects of Cutting Speed on Surface Integrity of Inconel 718[J]. Transactions of the Chinese Society for Agricultural Machinery,2011,42(1):223-227.

復制
分享
文章指標
  • 點擊次數:
  • 下載次數:
  • HTML閱讀次數:
  • 引用次數:
歷史
  • 收稿日期:
  • 最后修改日期:
  • 錄用日期:
  • 在線發布日期:
  • 出版日期:
文章二維碼