亚洲一区欧美在线,日韩欧美视频免费观看,色戒的三场床戏分别是在几段,欧美日韩国产在线人成

考慮微凸體彈塑性變形的結合面分形接觸模型
作者:
作者單位:

作者簡介:

通訊作者:

中圖分類號:

基金項目:

國家自然科學基金資助項目(51175242);國家科技重大專項(2010ZX04011—032)


Fractal Contact Model of Joint Interfaces Considering Elastic-plastic Deformation of Asperities
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 圖/表
  • |
  • 訪問統計
  • |
  • 參考文獻
  • |
  • 相似文獻
  • |
  • 引證文獻
  • |
  • 資源附件
  • |
  • 文章評論
    摘要:

    基于分形接觸理論,建立了考慮微凸體彈塑性變形的結合面分形接觸模型。通過對所建模型的數值仿真,直觀揭示了接觸載荷與實際接觸面積間的非線性關系,以及彈塑性變形對結合面接觸的影響。仿真結果表明,接觸載荷隨著實際接觸面積的增加而增加,兩者呈近似線性關系。同樣的接觸面積下,接觸載荷隨著分形粗糙度系數G的增加而增加,隨著分形維數D變化的規律比較復雜。彈塑性接觸面積占總接觸面積的比例隨著接觸面積的增加而略微減小,同時隨著G的增加而增加。彈塑性接觸面積所占比例與D的關系是復雜的。彈塑性接觸載荷不可忽略,彈塑性載荷占總載荷的比例與粗糙度系數及接觸面積無關,只隨著分形維數的增加而減小。忽略微凸體彈塑性接觸時,接觸載荷會略大于考慮彈塑性接觸時的結果,誤差在5%~60%之間,誤差隨著分形維數的增加而減小。

    Abstract:

    A fractal model of joint interfaces was established based on fractal contact theory. The elastic-plastic deformation of asperities was taken into account in the model. By numerical simulation, the nonlinear relationship between the contact force and the real contact area was obtained,as well as the effects of elastic-plastic deformation on the contact of joint interfaces. The result showed that the contact force increased nearly linearly with the real contact area. The contact force decreased due to the increase of fractal roughness parameter G with the same contact area, but complicatedly varies with the fractal dimension D. The share of elastic-plastic contact area decreased with the increase of real contact area, increased with the increase of G, and complicatedly varies with D. The share of elastic-plastic was large enough and can not be ignored. It decreased with the increase of D.When the elastic-plastic deformation was overlooked, the contact fore was slightly larger than the results involved the elastic-plastic deformation. The error percentage lied within the range 5%~60%, which decreased with the increase of D.

    參考文獻
    相似文獻
    引證文獻
引用本文

繆小梅,黃筱調,袁鴻.考慮微凸體彈塑性變形的結合面分形接觸模型[J].農業機械學報,2013,44(1):248-252. Miao Xiaomei, Huang Xiaodiao, Yuan Hong. Fractal Contact Model of Joint Interfaces Considering Elastic-plastic Deformation of Asperities[J]. Transactions of the Chinese Society for Agricultural Machinery,2013,44(1):248-252.

復制
分享
文章指標
  • 點擊次數:
  • 下載次數:
  • HTML閱讀次數:
  • 引用次數:
歷史
  • 收稿日期:
  • 最后修改日期:
  • 錄用日期:
  • 在線發布日期: 2012-12-31
  • 出版日期: