亚洲一区欧美在线,日韩欧美视频免费观看,色戒的三场床戏分别是在几段,欧美日韩国产在线人成

基于硬度梯度的熱成形高強鋼彎曲性能研究
作者:
作者單位:

作者簡介:

通訊作者:

中圖分類號:

基金項目:

國家自然科學基金重點資助項目（10932003、11272075）、高等學校博士學科點專項科研基金資助項目（20100041120017）和國家工信部04重大專項基金聯合資助項目（2011ZX04001-021）


Bending Behavior Based on Hardness Gradient for Hot Forming High Strength Steel
Author:
Affiliation:

Fund Project:

  • 摘要
    • |
  • 圖/表
    • |
  • 訪問統計
    • |
  • 參考文獻
    • |
  • 相似文獻
    • |
  • 引證文獻
    • |
  • 資源附件
    • |
  • 文章評論
    摘要:

    采用熱成形高強度鋼設計了不同厚度板料的三點彎曲試驗，得到了相關彎曲力學性能參數。實驗表明：熱成形高強度鋼的彎曲力學性能隨厚度的增加而增強，在厚度方向上硬度分布呈中間高、兩側低的梯度分布規律，形成了具有連續梯度分布的多層金屬復合材料?；诤穸确较蛴捕忍荻确植家?guī)律及硬度-強度對應關系，建立了一種多層金屬復合材料的三點彎曲數值仿真模型，研究了熱成形板材在變梯度彎曲模型下更合理的數值模擬方法。

    Abstract:

    A three-point bending test of hot forming high strength steel specimens with different thickness was designed. The related mechanical parameters were obtained. The results indicated that the bending mechanical properties of hot forming specimens were strengthened with the increase of the thickness. The specimens which were based on different thickness had higher center hardness and lower surface hardness. Meanwhile, a multi-layer composite material was proposed with hardness gradient distribution in the direction of the thickness. Based on the hardness gradient and the hardness-strength corresponding to the relationship, a multi-layer gradient numerical simulation model of three-point bending was established, explored that the gradient material model was more rational for numerical simulation. 

    參考文獻
    相似文獻
    引證文獻
引用本文

申國哲,李效文,盈亮,史棟勇,郭潤清,孟召煥.基于硬度梯度的熱成形高強鋼彎曲性能研究[J].農業機械學報,2013,44(2):261-266. Shen Guozhe, Li Xiaowen, Ying Liang, Shi Dongyong, Guo Runqing, Meng Zhaohuan. Bending Behavior Based on Hardness Gradient for Hot Forming High Strength Steel[J]. Transactions of the Chinese Society for Agricultural Machinery,2013,44(2):261-266.

復制
分享
文章指標
  • 點擊次數:
  • 下載次數:
  • HTML閱讀次數:
  • 引用次數:
歷史
  • 收稿日期:
  • 最后修改日期:
  • 錄用日期:
  • 在線發布日期: 2013-02-04
  • 出版日期:
文章二維碼