亚洲一区欧美在线,日韩欧美视频免费观看,色戒的三场床戏分别是在几段,欧美日韩国产在线人成

立式環模生物質成型機設計與試驗
作者:
作者單位:

作者簡介:

通訊作者:

中圖分類號:

基金項目:

“十二五”國家科技支撐計劃資助項目(2012BAD30B0201)


Study on Biomass Briquetting Machines with Vertical Ring Die
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 圖/表
  • |
  • 訪問統計
  • |
  • 參考文獻
  • |
  • 相似文獻
  • |
  • 引證文獻
  • |
  • 資源附件
  • |
  • 文章評論
    摘要:

    針對目前我國生物質壓塊機存在的生產率低、能耗高及成型燃料質量低等問題,采用立式環模原理,設計了一種新型生物質壓塊機,設計了帶有加熱電阻和降溫水道的環模,并以粉碎玉米秸稈為原料進行試驗,試驗結果表明,生產率為2.1t/h,噸功耗35.6kW·h/t,整機噪聲82dB(A),成型率為95.4%,成型密度為1.1g/cm 3 ,各項指標均達到設計及標準要求,啟動時采用加熱電阻,能夠縮短預運行時間50~65min,正常生產時,燃料的溫度能夠降低20~30℃,生產率比未采用加熱降溫環模時增加5%。

    Abstract:

    For the low productivity, high energy consumption and low briquette quality of biomass briquetting machine, the principle of vertical ring die was used. A biomass briquetting machine was developed. A ring mold with heating resistor and cooling waterways was designed. The crushed corn straw was taken as raw materials for the experiment. The experiment result showed that the production rate was 2.1t/h. Tons of power consumption was 35.6kW· h/t. Machine noise was 82dB (A). The molding rate was 95.4%. The forming density was 1.1g/cm 3 . The indicators could reach the design and standard requirements. It could shorten the pre run time by 50min to 65min by using the heating resistor. The ring mold takes cooling device. The temperature of the fuel could be reduced by 20℃ to 30℃ and the production can be increased by 5% than non adopted in normal production.

    參考文獻
    相似文獻
    引證文獻
引用本文

姚宗路,趙立欣,田宜水,孟海波,龐麗沙,霍麗麗.立式環模生物質成型機設計與試驗[J].農業機械學報,2013,44(11):139-143. Yao Zonglu, Zhao Lixin, Tian Yishui, Meng Haibo, Pang Lisha, Huo Lili. Study on Biomass Briquetting Machines with Vertical Ring Die[J]. Transactions of the Chinese Society for Agricultural Machinery,2013,44(11):139-143.

復制
分享
文章指標
  • 點擊次數:
  • 下載次數:
  • HTML閱讀次數:
  • 引用次數:
歷史
  • 收稿日期:
  • 最后修改日期:
  • 錄用日期:
  • 在線發布日期: 2013-11-07
  • 出版日期:
文章二維碼