亚洲一区欧美在线,日韩欧美视频免费观看,色戒的三场床戏分别是在几段,欧美日韩国产在线人成

基于特征參數的DCA-LET結構設計與性能分析
作者:
作者單位:

作者簡介:

通訊作者:

中圖分類號:

基金項目:

國家自然科學基金項目(51475037)


Structure Design and Performance Analysis of DCA-LET Based on Characteristic Parameters
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 圖/表
  • |
  • 訪問統計
  • |
  • 參考文獻
  • |
  • 相似文獻
  • |
  • 引證文獻
  • |
  • 資源附件
  • |
  • 文章評論
    摘要:

    設計了一種基于雙C型結構的柔性鉸鏈,稱為DCA-LET柔性鉸鏈。定義了影響該柔性鉸鏈性能的特征參數,通過對8組不同特征參數實例的仿真分析,擬合了特征參數與等效彈簧剛度之間的關系,推導了基于該鉸鏈特征參數的等效彈簧剛度的理論計算公式并且引入了修正系數。通過3組實例的理論計算和有限元仿真分析,驗證了理論計算公式以及修正系數的正確性。通過對比3組不同特征參數的DCA-LET柔性鉸鏈與內LET柔性鉸鏈的彎曲性能與抗拉性能,得出控制特征參數能夠控制該柔性鉸鏈的彎曲性能,同時保證其抗拉壓性能并沒有明顯下降。

    Abstract:

    LEMs achieve the movement and force transmission through flexure hinges, so it is very important to design flexure hinges. A new type of flexure hinge based on double C-type structure was proposed, named as DCA-LET flexure hinge. The characteristic parameters influencing the performance of the flexure hinge were defined. Based on the simulation analysis of eight examples of different characteristic parameters, the fitting curve of the relationship between the characteristic parameters and the simulation values of the equivalent stiffness was obtained. The theoretical formula of equivalent spring stiffness based on the characteristic parameters of the hinge was deduced and the correction factor was introduced. The correctness of theoretical calculation formula and correction factor was verified by theoretical calculation and finite element simulation of three examples. The bending and tensile properties of three DCA-LET flexure hinges with different characteristic parameters and inside LET flexure hinge were compared, and the results showed that the DCA-LET flexure hinge had better overall performance than the LET flexure hinge. The characteristic parameters can control the bending performance of DCA-LET hinge, and its tensile and compression properties had no significant decrease, which provided an effective method for the design of the flexure hinges.

    參考文獻
    相似文獻
    引證文獻
引用本文

邱麗芳,黃鋼,陳海翔.基于特征參數的DCA-LET結構設計與性能分析[J].農業機械學報,2017,48(8):399-404. QIU Lifang, HUANG Gang, CHEN Haixiang. Structure Design and Performance Analysis of DCA-LET Based on Characteristic Parameters[J]. Transactions of the Chinese Society for Agricultural Machinery,2017,48(8):399-404.

復制
分享
文章指標
  • 點擊次數:
  • 下載次數:
  • HTML閱讀次數:
  • 引用次數:
歷史
  • 收稿日期:2017-01-14
  • 最后修改日期:
  • 錄用日期:
  • 在線發布日期: 2017-08-10
  • 出版日期: