亚洲一区欧美在线,日韩欧美视频免费观看,色戒的三场床戏分别是在几段,欧美日韩国产在线人成

(2-RPU+UPU)+(RR)混聯機構末端約束和運動耦合分析
作者:
作者單位:

作者簡介:

通訊作者:

中圖分類號:

基金項目:

國家自然科學基金面上項目(52275033)、河北省中央引導地方科技發展資金項目(206Z7602G)、廣東省普通高校機器人與智能裝備重點實驗室項目(2017KSYS009)、東莞理工學院機器人與智能裝備創新中心項目(KCYCXPT2017006)和東莞市科技特派員項目(20211800500242)


Terminal Constraint and Kinematic Coupling of (2-RPU+UPU)+(RR) Hybrid Mechanism
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 圖/表
  • |
  • 訪問統計
  • |
  • 參考文獻
  • |
  • 相似文獻
  • |
  • 引證文獻
  • |
  • 資源附件
  • |
  • 文章評論
    摘要:

    少自由度混聯機構有特殊的末端約束形式,同時其末端六維運動參數存在高度耦合,而以往對此類機構的研究多針對并聯和串聯模塊分別開展,導致混聯機構的整機末端約束和運動耦合研究被忽視,此類機構的約束和運動分析存在缺陷。本文采用Grassmann-Cayley代數分析了(2-RPU+UPU)+(RR)機構的末端約束,基于該機構的約束方程建立了其末端運動耦合模型,并以此得到了該機構修正的運動學反解模型。末端約束分析結果表明(2-RPU+UPU)+(RR)機構的末端約束為一個螺旋(1H)型約束,其自由度形式為兩轉兩移一螺旋(2R2T1H)型運動。運動耦合結果表明該機構6維位姿耦合關系表現為一個多元耦合方程,在給定其中的5個獨立參數后,另一個參數可通過該耦合方程確定。本文建立的(2-RPU+UPU)+(RR)機構的約束分析和運動耦合模型可為少自由度混聯機構的末端約束和運動耦合分析提供參考。

    Abstract:

    The lower mobility hybrid mechanism has a special form of terminal constraints, and its terminal motion parameters are highly coupled. The parallel and serial modules of the hybrid mechanisms were often studied separately in the previous researches, resulting in the neglect of the research on the terminal constraint and motion coupling of the whole hybrid mechanism. There are defects in the constraint and motion analysis of this kind of mechanisms. The terminal constraint of the (2-RPU+UPU)+(RR) mechanism was analyzed by using the Grassmann-Cayley algebra. Based on the constraint equations, the terminal motion coupling model of this mechanism was established. Then the modified inverse kinematics of this mechanism was obtained subsequently. The result of terminal constraint analysis showed that the terminal constraint of the (2-RPU+UPU)+(RR) mechanism was a helical (1H) type constraint, and its degree of freedom was two rotational (2R), two translation (2T) and one 1H type motion. The result of motion coupling analysis showed that the 6-dimensional pose coupling relationship of the (2-RPU+UPU)+(RR) mechanism was expressed in the form of a multivariate coupling equation. The constraint analysis and motion coupling model of the (2-RPU+UPU)+(RR) mechanism established provided a reference for the terminal constraint and motion coupling analysis of lower mobility hybrid mechanisms.

    參考文獻
    相似文獻
    引證文獻
引用本文

胡波,高添,曾達幸,盧文娟,王帥,王國永.(2-RPU+UPU)+(RR)混聯機構末端約束和運動耦合分析[J].農業機械學報,2023,54(10):416-420,458. HU Bo, GAO Tian, ZENG Daxing, LU Wenjuan, WANG Shuai, WANG Guoyong. Terminal Constraint and Kinematic Coupling of (2-RPU+UPU)+(RR) Hybrid Mechanism[J]. Transactions of the Chinese Society for Agricultural Machinery,2023,54(10):416-420,458.

復制
分享
文章指標
  • 點擊次數:
  • 下載次數:
  • HTML閱讀次數:
  • 引用次數:
歷史
  • 收稿日期:2023-04-10
  • 最后修改日期:
  • 錄用日期:
  • 在線發布日期: 2023-06-05
  • 出版日期:
文章二維碼