亚洲一区欧美在线,日韩欧美视频免费观看,色戒的三场床戏分别是在几段,欧美日韩国产在线人成

丘陵山地姿態調整輪式拖拉機運動控制研究
作者:
作者單位:

作者簡介:

通訊作者:

中圖分類號:

基金項目:

國家重點研發計劃項目(2022YFD2001303-2、2016YFD0700503-1)


Motion Control of Attitude Adjustment Wheeled Tractor in Hilly and Mountain Areas
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 圖/表
  • |
  • 訪問統計
  • |
  • 參考文獻
  • |
  • 相似文獻
  • |
  • 引證文獻
  • |
  • 資源附件
  • |
  • 文章評論
    摘要:

    以丘陵山地姿態調整輪式拖拉機為研究對象,提出了一種基于改進遺傳算法的運動控制方法,可根據地形條件實現對拖拉機的實時調平控制,提高其車身穩定性。首先,根據拖拉機機構間的運動關系,建立表征其輪心位置與車身姿態參數關系的運動學模型,并進行算例求解,驗證了運動學模型的正確與準確性。然后,以提高拖拉機車身穩定性為控制目標,在運動學建模的基礎上設計了一種基于改進遺傳算法的運動控制方法。最后,對算法進行仿真驗證,結果表明,使用算法進行運動控制可有效降低其車身姿態角,橫向坡地最大側傾角降低13.3°,縱向坡地最大俯仰角降低4.3°;在兩種坡度兼有的路面上進行綜合調整,其最大側傾角和最大俯仰角分別降低13.8°和4°,極大提高了車身穩定性。同時將改進遺傳算法與傳統遺傳算法進行對比,結果表明,改進遺傳算法在響應時間和控制精度方面均優于傳統遺傳算法,其算法響應時間較傳統遺傳算法縮短63.93%,大幅提高了算法效率。

    Abstract:

    In order to improve the stability of the tractors in hilly and mountainous areas, a motion control method was designed based on improved genetic algorithm, which can achieve real-time leveling control according to terrain conditions. Firstly, according to the kinematic relationship of the tractor attitude adjustment mechanism, a kinematic model representing the relationship between the wheel center position and the body attitude parameters was established, and a numerical example was given to solve the problem to verify the correctness and accuracy of the kinematic model. Then, with the aim of improving the stability of tractor body, a tractor motion control method based on improved genetic algorithm was designed while considering the kinematics model. Finally, the simulation results showed that the motion control algorithm can effectively reduce the body attitude angle, the maximum lateral slope angle was reduced by 13.3°, and the maximum pitch angle of the longitudinal slope was reduced by 4.3°. The comprehensive adjustment on the road with both slopes can reduce the maximum side angle and the maximum pitch angle by 13.8° and 4°, respectively, which greatly improved the stability of the body. At the same time, the improved genetic algorithm was compared with the traditional genetic algorithm. The results showed that the improved genetic algorithm was superior to the traditional genetic algorithm both in response time and control accuracy. The response time of the improved genetic algorithm was reduced by 63.93% compared with that of the traditional genetic algorithm, and the efficiency of the algorithm was greatly improved.

    參考文獻
    相似文獻
    引證文獻
引用本文

姜惠,唐小虎,張旭烽,徐國艷,高峰.丘陵山地姿態調整輪式拖拉機運動控制研究[J].農業機械學報,2024,55(6):392-403. JIANG Hui, TANG Xiaohu, ZHANG Xufeng, XU Guoyan, GAO Feng. Motion Control of Attitude Adjustment Wheeled Tractor in Hilly and Mountain Areas[J]. Transactions of the Chinese Society for Agricultural Machinery,2024,55(6):392-403.

復制
分享
文章指標
  • 點擊次數:
  • 下載次數:
  • HTML閱讀次數:
  • 引用次數:
歷史
  • 收稿日期:2024-01-28
  • 最后修改日期:
  • 錄用日期:
  • 在線發布日期: 2024-06-10
  • 出版日期:
德国纳达NBM550| 全自动\压对线\切角压线\纸盒贴窗机| 工业用电子秤| 衡昇ICP| 耐高温风速变送器| 河北膨体四氟垫片| 工业厂房降温| 全自动压力校验装置| SV630B莱宝真空泵| 大容量离心机| Magnescale探规| 手持式能谱仪| 护栏网| 山东布袋除尘器| 无菌全自动封管机| 筑鼎化工设备| 无线远传蒸汽流量计| lwgy液体涡轮流量计| 便携式手持盐度计| 新材料分散| 非金属膨胀节| 防爆旋转蒸发仪厂家| cod智能消解器| 宁夏银川外墙装饰一体板| 自动转塔维氏硬度计| 沙子制砂机| 诸城金运机械| 温室喷灌机生产厂家| 糖原pas染色试剂盒| 汽车零部件清洁度检测| 齿辊分级破碎机| 伺服钻孔动力头| 反应釜高低温一体机| 气体泄漏报警控制器| 粉尘浓度探测器| 熔体出料泵| 在线悬浮物浓度计| 海鲜漂烫蒸煮机| 工业扫地车| 折叠身高体重秤| 中子测量仪|